Compiling GTK+ on Mac OS X 10.5 Leopard

UMIT is an awesome graphical frontend for nmap. It works out of the box, that is, unzip and go. But, it requires GTK+2, which is a totally different history...

Compiling GTK+ on Mac OS X can be a time consuming task, specially if you don't want to use tools like Fink or MacPorts. Obviously I don't keep backup of my libs so after my last HDD crash (less than a year brand new MacBook, thanks to MacSaber) I had to redo all the GTK saga again. This time I am going to record the whole process to the history, so I can drastically reduce the efforts on future attempts.

Yes, GTK has a million dependencies that have a million dependencies themselves leaving us with a gazillion libraries to take care of. While I was going forward and back across the dependencies I wrote down what depends on what. That's what I came up with:

• gtk
  
• glib
• pkg_config
• gettext
• expat
• libpng
• atk
• pango
  
  • cairo
  • pixman
  • freetype
  • fontconfig
• libtiff
  
  • libjpeg

Easy, huh ? No its not what it looks like. It took me a whole day and a half to fix every little issue that kept me from going ahead during the process. For each library, there is a special trick you have to learn.

For the architecture I decided to go with i686 after gettext complained about x86_64. Yes, I had to go back and re-compile everything that was already done until that step.

I like to install everything on /usr/local so I know where my stuff is laying around. Also, I tried to find the latest version of each package in the time this blog entry was written. Some stuff is hosted on more than one "official" place and not always it is updated everywhere. So I could fail on finding the state of the art for everything here but I am probably close to that.

I am not going to report any error message or to detail any problem that I faced during the process. Instead I will go direct to the point.

GLIB

we start with pkg_config:

wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
tar -zxf pkg-config-0.23.tar.gz
cd pkg-config-0.23
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

then we move to gettext, that requires expat:

wget http://ufpr.dl.sourceforge.net/sourceforge/expat/expat-2.0.1.tar.gz
tar -zxf expat-2.0.1.tar.gz
cd expat-2.0.1
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

before going to gettext we need to hack emacs as found here:

sudo mv /usr/bin/emacs-i386 /usr/bin/emacs-i386.backup
sudo /usr/libexec/dumpemacs -d

finally gettext:

wget ftp://ftp.unicamp.br/pub/gnu/gettext/gettext-0.17.tar.gz
tar -zxf gettext-0.17.tar.gz
cd gettext-0.17
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

and the last item on glib, libpng:

wget http://ufpr.dl.sourceforge.net/sourceforge/libpng/libpng-1.2.25.tar.bz2
tar -jxf libpng-1.2.25.tar.bz2
cd libpng-1.2.25
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

now glib itself, that is by far more problematic than the libs above:

wget http://ftp.gnome.org/pub/gnome/sources/glib/2.14/glib-2.14.6.tar.bz2
tar -jxf glib-2.14.6.tar.bz2
cd glib-2.14.6

at this point we have to patch glib/gutils.h as seen here:

--- gutils.h 2008-02-07 03:24:59.000000000 -0200
+++ /usr/src/glib-2.14.6/glib/gutils.h 2008-03-06 16:43:34.000000000 -0300
@@ -108,6 +108,8 @@
#ifdef G_IMPLEMENT_INLINES
# define G_INLINE_FUNC
# undef G_CAN_INLINE
+#elif defined (__APPLE__)
+# define G_INLINE_FUNC static inline
#elif defined (__GNUC__)
# if __GNUC_PREREQ (4,2) && defined (__STDC_VERSION__) \
&& __STDC_VERSION__ >= 199901L

also the C compiler need some special flags. the SSE instructions have to be enabled with -msse2 which is mandatory here. I copied the other flags from the portfile at MacPorts. Finally:

./configure --prefix=/usr/local --enable-static CFLAGS="-arch i686 -msse2 -funroll-loops -fstrict-aliasing -finline-functions" LDFLAGS="-bind_at_load"
make
sudo make install

GTK

the next is atk:

wget http://ftp.gnome.org/pub/gnome/sources/atk/1.21/atk-1.21.92.tar.bz2
tar -jxf atk-1.21.92.tar.bz2
cd atk-1.21.92
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

and following cairo deps, pixman:

wget http://cairographics.org/releases/pixman-0.9.6.tar.gz
tar -zxf pixman-0.9.6.tar.gz
cd pixman-0.9.6
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

freetype:

wget http://download.savannah.gnu.org/releases/freetype/freetype-2.3.5.tar.bz2
tar -jxf freetype-2.3.5.tar.bz2
cd freetype-2.3.5
./configure --prefix=/usr/local CFLAGS="-arch i686 -msse2"
make
sudo make install

fontconfig:

wget http://fontconfig.org/release/fontconfig-2.4.92.tar.gz
tar -zxf fontconfig-2.4.92.tar.gz
cd fontconfig-2.4.92
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install

and finally cairo. note we need again the SSE instructions plus we have to specify the location of the X development libraries. If you don't have it, refer to apple support on how to install Xcode tools and X11.

wget http://cairographics.org/releases/cairo-1.4.14.tar.gz
tar -zxf cairo-1.4.14.tar.gz
cd cairo-1.4.14
./configure --prefix=/usr/local --enable-xlib --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib CFLAGS="-arch i686 -msse2"
make
sudo make install

now that we have cairo done, we can do pango:

wget http://ftp.gnome.org/pub/GNOME/sources/pango/1.19/pango-1.19.4.tar.bz2
tar -jxf pango-1.19.4.tar.bz2
cd pango-1.19.4
./configure --prefix=/usr/local CFLAGS="-arch i686 -msse2"
make
sudo make install

libjpeg has a special rule hidden inside the makefile, that you don't want to miss:

wget http://www.ijg.org/files/jpegsrc.v6b.tar.gz
tar -zxf jpegsrc.v6b.tar.gz
cd jpeg-6b
./configure --prefix=/usr/local CFLAGS="-arch i686"
make
sudo make install
sudo make install-lib

and the last one, libtiff:

wget ftp://ftp.remotesensing.org/pub/libtiff/tiff-3.8.2.tar.gz
tar -zxf tiff-3.8.2.tar.gz
cd tiff-3.8.2
./configure --prefix=/usr/local --with-apple-opengl-framework CFLAGS="-arch i686"
make
sudo make install

we are now all ready to the big guy:

wget http://ftp.gnome.org/pub/gnome/sources/gtk+/2.12/gtk+-2.12.8.tar.bz2
tar -jxf gtk+-2.12.8.tar.bz2
cd gtk+-2.12.8
./configure --prefix=/usr/local --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib CFLAGS="-arch i686 -msse2"
make
sudo make install

and voilá ! it took me many hours to get here, I hope you can do it in minutes ;)

We are not ready for UMIT yet. We need the python bindings still. see you in the next adventure.

update: thanks to Gregory and Antoine for pointing out the typos